Category Archives: OS X

Plugable USB 2.0 10-Port Hub with 20W Power Adapter

Features Flexible design with 6 front ports and 4 rear- including two BC 1.2 Standard compliant flip-up charging ports USB 2.0 high-speed interface, 10 downstream ports with data rates up to 480Mbps 20W Power Adapter shared by the 10 ports, assumes a mix of high and low power devices Easy plug-and-play installation (no driver required); […]

Read More

DisplayLink Releases Version 2.1 Driver for Mac OS X

There have been many multi-monitor regressions from OS X 10.8.5 to 10.9, and USB graphics has been significantly impacted. Part of the confusion is not knowing which new problems are fixable by DisplayLink and which ones will require waiting for the next point releases by Apple. We have a clearer picture of that now with […]

Read More

Before You Upgrade To Mac OS X 10.9 (“Mavericks”)

Update 10/22/14: With the release of 10.10 (Yosemite), unfortunately there’s not much improved USB graphics behavior to report, as the key issues outlined in this post still exist. We’ve posted an update regarding USB graphics and other USB device behavior with Yosemite that can be found here. DisplayLink has recently released an updated beta driver […]

Read More

Multiple Monitor Issues with OS X 10.9 (Mavericks) and 10.10 (Yosemite)

Update 03/16/15: DisplayLink has released a new beta driver which makes significant progress in reducing some of the undesirable behavior outlined below. Please read this blog post for additional information and the download link. Update 10/22/14: With the release of 10.10 (Yosemite), unfortunately there’s not much improved USB graphics behavior to report, as the key […]

Read More

DisplayLink Apple Mac OS X 2.1 Beta now available

DisplayLink has released a beta of their new version 2.1 drivers (Sept, 2013) for Apple Mac OS X 10.6 – 10.9. This new 2.1 driver has many improvements over the previous Mac OS X version 2.0 drivers (March, 2013). In short, it’s a must-have install for Mac users on 10.8.5 and earlier. It supports all […]

Read More

DisplayLink Graphics, Ethernet, and Audio Limitations on OS X 10.8.4

Plugable uses DisplayLink chips in all our USB 3.0 universal docking stations and graphics devices. DisplayLink’s chip and drivers can provide an extra display or two, along with audio and networking ports, all via one USB cable. For users seeking an affordable way to expand their Mac, this can both simplify connecting everything and increase […]

Read More

USB3-SATA-UASP1 Hard Drive Dock

Understanding Large SATA Drive Compatibility

This post is intended to offer detailed technical information for troubleshooting issues affecting new “Advanced Format” 512e SATA disk drives. Plugable’s full-size 3.5″ hard drive docks, the USB3-SATA-UASP1, and USB3-SATA-U3, both feature support for these new 512e Advanced Format drives. Our Plugable Storage System “PSS” products also support 512e large volumes (as soon as 2.5″ […]

Read More

USB3-SATA-U3 (ASMedia 1051e) Firmware Update

This article is no longer relevant. Please see our firmware update page here. Plugable is pleased to announce that a firmware update for our USB3-SATA-U3 adding the following features is now available: Improved support for 512e “Advanced Format” drives. Spin down disks after 10 minutes of inactivity, resume on access. Spin down disks on system […]

Read More