Features
- Enables you to connect USB 1.1, 2.0, and 3.0 devices to your new USB-C laptop, tablet, or phone.
- Includes USB Type-A Female and a Type-C Male connectors at each end.
- Provides USB 3.0 passive connection via 200 mm / 7.5″ cable with gold plated contacts.
- Allows for transfer speeds up to 5 Gbps.
- Does not support BC 1.2 charging or power delivery.
- Tablets and phones must support the USB device being connected in order to work with this cable.
Description
Through our USB Type-C (USB-C) to female Type-A cable, you can plug almost any legacy USB 1.1, 2.0, or 3.0 device you own into your new USB-C equipped laptop, tablet, or phone. Since this cable is a passive adapter and is short in length, its functionality prevents signal interference and timing issues associated with active cables. Our adapter cable features clean shielding and is easy to use.
As a USB 3.0 cable, our USB Type-C to female Type-A cable supports up to 5 Gbps, SuperSpeed for USB 3.0 devices, with backwards compatibility for USB 1.1 and 2.0 devices. USB 3.0 adapters with USB Type-C connectors like this one are also known as USB 3.1 Generation 1. In terms of functionality, it works the same way as USB 3.0 with transfer speeds up to 5 Gbps, and does not include any charging. The new standard, USB 3.1 Generation 2, supports up to 10 Gbps transfer rates and provides power delivery as well as video and audio output.
In the Bag
1 USB 3.0 Passive Type-A to Type-C Cable
Product Length (including connectors): 20 cm / 7.5 inches
Model: USBC-AF3
Where to Buy
neither object nor array? not implemented yet
Switch to gutenberg-Blocks!
There the JSON Content Importer Block gives an easier way to use the JSON-APIs.
Or: Switch on the Debugmode by adding "debugmode=10" in the Shortcode.
If all is without success: Open ticket at wordpress.org please
We have a Problem with JSON here:
Either we got no JSON from the API. Or the basenode-parameter is not ok.
Switch on the Debugmode of the Plugin!
Switch to gutenberg-Blocks!
There the JSON Content Importer Block gives an easier way to use the JSON-APIs.
Or: Switch on the Debugmode by adding "debugmode=10" in the Shortcode.
If all is without success: Open ticket at wordpress.org please
